A new purchased (or older) Canon printer needs to be set up. First, ensure you’ve installed the latest drivers and software from a valid site, for example – https://ij.start.canon or canon.com/setup. The wireless and wired models require drivers and software; therefore, each has to undergo one important installation process. If your printer model isn’t set up yet, you can get started now.  

CANON PRINTER SETUP STEPS IN BRIEF

  1. First of all, set up the printer hardware.
  2. Secondly, visit https://ij.start.cannon
  3. Use the “Set up” tab to select your IJ Canon model.
  4. Download and run the latest drivers & software.
  5. If the printer is wireless, connect to Wireless Network.
  6. If you have the USB cable, connect to the PC using the cable.
  7. Follow remaining instructions to finish canon ij setup.

COMPLETE SETUP GUIDE FOR CANON INKJET PRINTER

Guidelines for Canon Printer First-Time Hardware Setup

The setup process for every Canon model is almost similar, however the download through http://ij.start.cannon and installation process may differ. Let’s start with your Canon printer model setup –

  • The first thing is you have to remove the box packaging and take out the Canon printer model from the box.
  • The model hardware is packed in plastic, hence take off each tape, plastic and other packaging material. 
  • Make sure the surface where you are placing the printer is clean and close to Pc or laptop.
  • Check the shipped components with your inkjet printer. For example, setup CD for windows and mac, power cable, Cartridges and manual.
  • Take the power cable and connect one end to the printer’s power cord in the rear and another end to the power switch to start the Setup.
  • Press the ON button to turn your printer on.
  • If you see a stable light, pull the Paper Output Tray and cover.
  • Install Fine cartridge and ink cartridge, then slide paper guide.
  • Insert fine, valid blank papers and ensure everything is set up smoothly.
  • The canon printer model is Setup. Now you’ve to visit https://ij.start.cannon to download the latest printer software to continue further. 

Downloading Canon printer drivers and software

http://ij.start.canon 

1- Launch a web browser on your PC or laptop.

Close all background apps on your PC or laptop. Then, double click on your regular browser to open it. You can use the default one or go through others, i.e., Chrome, Edge, Mozilla Firefox.

https://ij.start.canon

 

2- Go to the https://ij.start.canon website. 

On the web address bar, enter the “https://ij.start.cannon” URL and press Enter key. The http://ij.start.canon is a Canon printer drivers download site that offers the latest software and drivers to download on your operating system.

https://ij.start.canon

 

3- Click the “Set Up” tab to continue.

The current page will show you four option for different information. Here, you’ve to select the “Set Up (Start Here)” tab to find the right options on the next page.

https://ij.start.canon

4- Select your Canon inkjet printer model.

The https://ij.start.canon site takes you to the Product page. Here a box appears asks you to enter the model name, hence type your printer model name, i.e., TS302 and click Go. You have another option to find your canon model. Scroll down the page and click on the Canon printer series to jump next.   

https://ij.start.canon

5- Start Canon printer drivers download. 

The download page appears automatically next. You have to click on the “Download” tab. Select the “Save” or “Save As” tab if you see another prompt on the download screen. For example, your printer software would start downloading quickly.

6- Run the downloaded drivers and software.    

Once you finish the Canon ij setup download on your system, click “Run” to start the installation. Then, follow on-screen instructions to complete the ij setup installation.

https://ij.start.canon

Connecting Canon IJ Printer to WiFi

WiFi or wireless connection is the best way to connect your PC and Canon printer. However, your printer should be the wireless model for this process. So let’s see how you can connect the WiFi to the IJ printer.

Step 1 – Ensure you’ve turned on your Canon printer model.

Step 2 – Install the printer drivers from the http://ij.start.cannon website.

Step 3 – Turn on your Canon model by pressing the ON button.

Step 4 – Tap or press the wireless icon or WiFi button.

https://ij.start.canon

Step 5 – The WiFi lamp should flash, at this time, make sure your wireless router is working.

Step 6 – Then, push the WPS button on the wireless router for a few seconds. 

Step 7 – Your printer may show you connected status. If not, check the WiFi and ON lights are; if stable, the connection has been made successfully.   

Installation Guide For Canon Printer Wireless Setup

This guide for your wireless canon model goes through different Windows and Mac system steps. Let’s find what instructions you have to follow on your device;

Wireless Installation On Windows  

  1. Turn on your Canon ij printer.

Make sure your printer is plugged to the power switch. Then, press the ON button to start your Canon inkjet printer.

turn on the canon printer

2. Select WiFi setup and connection method  

Most of the users use the WPS method if a direct WiFi button is available. Otherwise, tap OK in the Setup >WiFi Setup option.

https://ij.start.canon3. Tap on WPS option. 

Use the right arrow and select WPS (PIN Code) option. You may also use the WPS (Push button) method if your router has a direct WPS button.

https://ij.start.canon4. Enter the PIN code and connect the printer to the wireless connection. 

Your canon printer display shows up a PIN code that you need to enter on the router. You should read the router manual to learn how to enter this PIN. Next, you’ll see “Connected status” on the printer display; tap OK.

step 4 - Enter PIN code and connect the printer to wireless connection

5. Open https://ij.start.cannon URL on the web browser.

Launch a web browser and visit http://ij.start.cannon site to find correct drivers and software for your canon printer model.

httpsij.start.cannon

6. Download Canon printer drivers for windows. 

Ij.start.canon shows four options, select Set Up, then enter your Canon printer model name to jump on the download page. Now, select “Windows OS” from the upper right corner and click on the “download” tab to download universal drivers for your model.

httpsij.start.cannon

7. Start the installation by selecting Run.  

When http://ij.start.canon completes Ij printer drivers download, click Run to start the process. Otherwise, double-click on the .exe file then selects the Start Setup tab.

http://ij.start.canon

8. Click Yes to accept license terms.

A license agreement is the next window in the installation setup. You should review it, then click Yes to accept Canon printer’s terms.

http://ij.start.canon

9. Select the preferred option if the Extended Survey Program appears. 
An Extended Survey Program window (may or may not) appears that keeps you updated by sending information, so you can join this survey program by checking the “Deactivate the block” box and clicking Agree.

10. Check the connection method to continue.

As we are using wireless installation, a connection method screen appears during the process. Hence you have to ensure your connection and models details. Then, click Yes to confirm and wait for printer drivers’ installation.

11. If required, install additional printer or scanner drivers.

The software you downloaded from https://ij.start.canon comes with a few printer and scanners drivers that you can install now. A list will appear on your screen; hence select drivers you require and follow prompts to install. Once the final installation page displays, click Exit to finish.

http://ij.start.canon

12. Exit the screen once Canon printer drivers are installed.

It takes a few seconds to minutes, and your Canon ij setup will be completed. Click “Exit” to close the installation window.

Install Canon Printer Wirelessly On Mac

  1. Turn on your printer and press the screwdriver (setting) button.

Press the ON button to start the Canon printer, then find a screwdriver looks button. It is the setting button, hence press to display settings on the printer screen.

http://ij.start.cannon

2. Press OK on Wireless LAN setup.

The Canon printer screen shows you the Wireless LAN setup option. Tap OK and press the right button until you see the “WPS Push button” tab. Again press OK.

http://ij.start.cannon

3. Turn on the wireless router to proceed WPS Push Button method.

If your wireless router has stable lights, then it’s working well. Hence, now push the WPS button on your router until you see a new light flash. The printer will show you the “connected” status on the screen.

http://ij.start.cannon

4. You can select the WPS PIN method to connect the network.

If your router doesn’t have a WPS button, you can use WPS PIN to connect the network. Its manual connection procedure requires selecting the “Manual connect” or “WPS PIN” option using the same screwdriver or setting button. You should know the PIN of the router connection and enter it on the Printer screen when asked. If the PIN is correct, press OK, and the canon printer model will be connected to the WiFi network.

http://ij.start.cannon

5. Now, visit https://ij.start.canon using Safari. 

Open a browser like Safari on your macOS and enter “http://ij.start.canon” on the browser search tab. You’ll automatically jump to the canon printer help site, where you’ve to click on the “Set up” tab.

visit httpsij.start.canon using Safari

6. Use your Canon printer identity to download the latest software.   

Selecting the “Set Up” option on http://ij.start.cannon site redirects you to the product list page. Here, enter your printer model name on the shown box or scroll down the page and select from the displayed series list.

http://ij.start.cannon

7. Select macOS and click download to get Canon ij setup.

http://ij.start.cannon 

8. Start the installation and enter mac account details.

From the dock, click the Canon printer icon and double-click on the downloaded .dmg file to begin Ij start Canon software installation. Then, type the mac admin account ID and password to continue and click the “Install Helper” option.

http://ij.start.cannon

9. Accept license terms and select wireless connection.

Select your region and click Yes to accept Canon ij setup license terms. Next, tick on “Wireless LAN connection” to continue.

http://ij.start.cannon

10. Add your Canon printer model from the given list. 

The ij start canon software is about to finish installation; therefore, you have to add your printer series to your macOS device list. Click “Add printer” and tap on your model.

http://ij.start.cannon

11. Finish the Canon wireless installation.    

Install Canon printer’s additional drivers from the same software pack you downloaded from the https://ij.start.cannon site. Once finished, you can create a shortcut to the desktop and click Exit to close the installation window.

https://ij.start.canon

IJ Start Canon Printer Setup through USB Cable

If your inkjet printer fails to connect wirelessly, or you don’t want a long process, then a USB cable setup can work for you. You’ve to make sure the USB cable you are using is 3 to 5 m long. Then, start canon ij setup with the below steps;

Step 1: Keep your Canon printer turned on.

Step 2: You can use either the CD setup or the online drivers’ download method. Therefore, insert the Canon setup CD shipped with the printer. Otherwise, go through step 3.

Step 3: Go to Canon printer support – http://ij.start.cannon.

Step 4: Select “Set Up” and provide your Canon inkjet model name to open the download page.

Step 5: IJ printer products page helps you choosing your product, but you can type the model name in the shown box for the direct drivers’ download option.

Step 6: Select your operating system from the top right corner, click on the Download tab in the middle and wait for the Canon printer drivers and software download.

Step 7: Run the Setup with double-click on installer setup. It’ll automatically extract the canon ij setup file.

Step 8: Click on “USB connection” or on the next page.

Step 9: Connect the USB cable to the printer and PC (or laptop) hardware when it appears. For it, insert one side of the cable to the PC USB port and another side into the Canon model’s rear.

Step 10: Allow permissions and select your printer model. Also, choose access points from the given list.

Step 11: Follow on-screen instructions to finish the USB setup. Click complete.  

How to print?

1- Make sure you install appropriate printer drivers and software. Otherwise, visit https://ij.start.canon to download all.

2- Pull the input tray of your Canon printer and load suitable papers on it.

3- Go to your computer and open the file or document you wish to print.

4- Press CTRL P to start the process.

5- If required, you can customize the print setting by changing properties, quality, print size, number of paper and more.

6- Click the Print tab and wait for the input paper to print your document.

How to scan?

1- First of all, download Canon IJ Scan Utility from the canon support site.

2- Double-click to install the Utility file.

3- Once you install the Scan Utility, start it.

4- On your printer, load papers in a scanner tray.

5- Go to Settings and click document scan.

6- Click on Document and customize settings if required.

7- The scanning should start now with your Canon ij printer.

Frequently Asked Questions of Canon Ij Printers

How do I install my Canon printer without the CD?

You have to visit the official site – https://ij.start.cannon and download the latest drivers. It won’t require any CD for canon printer software installation. 

How do I connect my Canon printer to my computer via USB?

Install latest software and drivers of canon printer and plug in the USB cable to computer and printer. It’ll automatically be connected; however, you’ve to follow on-screen guidelines.

How do I install an IJ printer driver?  

Installing a regular canon ij printer driver requires its installer pack in the CD setup and http://ij.start.canon site. Once your PC or laptop has the installation ij setup, follow the instructions.

How do I set my Canon IJ to start?

Three simple steps to start canon Ij – 1. Set up the hardware, 2. Install updated drivers and software. 3. Connect to a network.     

How to fix the “Printer is not recognized” error? 

During Canon ij setup, you may experience this error due to a loose connection with a USB cable or no WiFi connection. Therefore, recheck and fix if the cable is faulty or damaged. Also, reconnect the wireless network to your Canon printer.

All the guidelines on this website work well for Canon Inkjet printers and assist users for Ij printer setup through http://ij.start.cannon site, which our knowledge has solely made. Canon.com/setup portal follows similar guidelines to set up Canon printer.

Comments